Multi-Verse — Parametric multiboard organizers

BOTTLE HOLDER

Bottle Ø inside (mm) Inside depth (mm) Wall (mm)

HOLDERS IN A ROW

Number of holders

Round walls touch, with small curved hourglass joins for strength. Joins stop at the top and bottom chamfers, following their size. Separate cavities, one piece. Each holder has its own rail on the 25mm board grid. All holders use the same bottle settings.

Tilted Bottle Tilt angle (°)

The bottle tilts away from the board; its rail stays vertical. Standard front and rear tool slots are omitted; the optional open-top front opening remains available.

Front slot Front slot height (%)

Shortens the slot from the top. None removes it.

Replace front slot with open-top opening Opening width (mm)

Open through the top; clears the floor and labels.

Bottom air hole (centered) Hole Ø (mm)

Inside sizes; walls build outward.

DRAWERS

Inside width (mm) Inside depth (mm) Inside height (mm)

These are exact usable drawer-storage dimensions. Shell walls and slide clearance build outward.

Wall (mm) Shell top

STANDALONE

Standalone shell (no rails or connector holes)

UNDER MOUNT

Under Mount shell (no rails or connector holes)

Rails and slots stay included.

Drawer clearance per side (mm)

Clearance applies to every drawer side.

Drawer stoppers V guide size (mm)

Off removes guides, grooves, and backing ridges only.

Inside scoop (10 mm)

Smooth front-floor ramp for small items. Side V grooves continue through it.

Handle width (mm) Handle height (mm) Handle projection (mm)

Defaults to 90% of drawer width. Enter a number to set it manually.

COMPARTMENTS

Divider height (both directions, %)

FRONT-TO-BACK DIVIDERS

Number of openings Divider spacing

Openings across the width. Custom positions use inside-width %.

LEFT-TO-RIGHT DIVIDERS

Number of openings Divider spacing

Openings along the depth. Custom positions use inside-depth %, measured from the back. Divides the drawer insert only, never the shell. 1 adds no divider; 2 across × 3 deep makes 6 compartments.

Parts export 15mm apart. Finish controls chamfers.

FIT

Fit clearance per side (mm)

Adds room per side; heights stay unchanged.

FINISH

Chamfer (mm)

Softens exposed edges. 0 is sharp.

LABELS

Front labels. Empty text hides.

VIEW

X-ray Cutaway (%)

Loading…

—